FCT300 belongs to the FCT family. They are black box motion controllers equipped with a PowerPC microprocessor, and programmable according to the standard IEC61131. The systems are CANopen and EtherCAT master and they are based on a real-time operating system (Precise MQX) with drivers developed by CMZ. CMZ has developed a wide range of libraries for the classic axes movement functions like: electronic cams, interpolation, flying shear, weight and temperature control and libraries dedicated to the realization of whole machine.
HARDWARE FEATURES
|
STRUCTURE |
|
Mechanical |
Rack in lamiera nichelata |
|
Dimensions (mm) |
H250 x W78 x D165 |
|
Weight (gr) |
1800 |
|
Power supply |
24Vdc ±20% |
|
Status leds |
Reset, Fault, SD Card |
|
|
|
Default Konfigrasyon |
|
CPU |
Power PC 1.333 GHz |
|
Memory |
Dynamic RAM:
512 MByte - DDR2 528 MHz |
|
Boot Flash Eprom 8 MByte |
|
Serial Flash Eprom 128 MByte |
|
Ferromagnetic serial FRAM 128 KByte |
|
Mass memory 1xSD card for user data storage 1x internal SD card slot |
Communication ports: |
|
Serial ports |
RS232, RS422/RS485 |
|
Ethernet |
2 ethernet ports 10/10/1000 Mbits |
|
Synchronous communication |
SMI port |
|
Standard Bus |
2 CANopen ports, EtherCAT |
On Board Optıons |
|
Optional bus |
2xAuxiliary CANopen, 2xEthernet 10/100 Mbps, Profibus DP slave, DeviceNet, EtherNet/IP |